Power Milling Chuck Manufacturers,power Milling Chuck Wholesale

DIN 69893 HSK-SKS Collet Chuck
SKS Collet Chuck

HSK-SKS Collet Chuck is very good at for high speed processing especially for electronic workpiece processing

1, The nut is designed in a full round, with small wind resistance and low noise, G2.5/25000 RPM ensure stable high-speed processing

2, The collet adopts a unilateral 4° design, which bring higher repeat clamping accuracy.

3, Slim body compared with ER collets, has stronger air avoidance.
DIN 69893 TG Collet Chuck
HSK-TG Collet chuck, Nut with steel ball increase the holding power by 75%, can be used for heavy-duty processing
DIN 69893 Pull Back Collet Chuck

Pull Back Collet Chuck

Built-in collet design

More suitable for high speed machining

Reduced interference when machining without nuts
DIN 69893 APU Drill Chuck Holder
APU Drill Chuck Holder

Used for clamping and fixing drill bits, APU tool handle can be adjusted by a hook wrench to realize clamping and releasing cutting tools, easy to operate and easy to replace tools.
DIN 69893 Precision Drill Chuck Holder

Precision Drill Chuck Holder

HSKA CPU Drill chuck ,worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy. Runout reach 0.05mm. The claw use Nitriding process increase the wear resistance and longer tool life

1)worm and gear structure greatly increase the clamping power. integral structure increase the rigidity and accuracy

2)Runout reach 0.05mm

3)Claw use Nitriding Porcess
DIN 69893 Quick Change Tapping Chuck with Length Compensation
Quick Change Tapping Chuck with Length Compensation
HSKA Tapping chuck with quick-change function using tap adaptor.

Short protrusion length. Length compensation mechanism.
DIN 2080 Drill Chuck Adapter
Drill Chuck Adapter
Used together with drill chuck head
DIN 2080 APU Drill Chuck Holder
APU Drill Chuck Holder

Used for clamping and fixing drill bits, APU tool handle can be adjusted by a hook wrench to realize clamping and releasing cutting tools, easy to operate and easy to replace tools.
DIN 2080 Quick Change Tapping Chuck with Length Compensation
Quick Change Tapping Chuck with Length Compensation

NT Tapping chuck with quick-change function using tap adaptor.

Short protrusion length. Length compensation mechanism.
MQL1 Channel Shrink Fit Chuck
MQL is addressing the issue of:
• Environmental intrusiveness and occupational hazards associated with airborne cutting fluid particles on the shop floor and the environment.
• Saving lubricant costs.
• Reduction of workpiece/tool/machine cleaning cycle time.
• Higher achievable cutting speeds, lower machining time and cost.
• Higher tool life through consistent coolant supply, no sudden thermal shock on the tool cutting edge.
• Less tool changes and less tools required.
• Machine environment and workpiece remains oil free .
• Dry and clean swarfs - directly recyclable.
• Less energy consumption of the machine.

<<Previous << 11 12 13 >> Next>>