Excellent Tool Holders Suppliers,best Shink Fit Tool Holder For You

1) The uniform clamping force makes the runout accuracy of the tool very high (≤0.003mm)
2)The clamping force is large
3) Shrink clamping technology can increase the cutting speed and feed rate, and at the sametime improve the roughness of the machined surface, so that the tool and spindle life can beincreased
4) Compact and symmetrical structure, small size, suitable for deep cavity machining
5) Can adapt to high-speed rotation
6) Suitable for finishing and roughing

MQL2 Channel Coolant Supply Set
MQL1 Channel Coolant Supply Set
MQL2 Channel Length Setting Screws
MQL1 Channel Length Setting Screws
MQL2 Channel Shrink fit Chuck
MQL is addressing the issue of:
• Environmental intrusiveness and occupational hazards associated with airborne cutting fluid particles on the shop floor and the environment.
• Saving lubricant costs.
• Reduction of workpiece/tool/machine cleaning cycle time.
• Higher achievable cutting speeds, lower machining time and cost.
• Higher tool life through consistent coolant supply, no sudden thermal shock on the tool cutting edge.
• Less tool changes and less tools required.
• Machine environment and workpiece remains oil free .
• Dry and clean swarfs - directly recyclable.
• Less energy consumption of the machine.
MQL1 Channel Shrink Fit Chuck
MQL is addressing the issue of:
• Environmental intrusiveness and occupational hazards associated with airborne cutting fluid particles on the shop floor and the environment.
• Saving lubricant costs.
• Reduction of workpiece/tool/machine cleaning cycle time.
• Higher achievable cutting speeds, lower machining time and cost.
• Higher tool life through consistent coolant supply, no sudden thermal shock on the tool cutting edge.
• Less tool changes and less tools required.
• Machine environment and workpiece remains oil free .
• Dry and clean swarfs - directly recyclable.
• Less energy consumption of the machine.
DIN69893 HSK-F Shrink Chuck Taper

The same shrink fit tool holder blank can be installed with separate extension rods of different diameters/lengths.
DIN69893 HSK-E Shrink Chuck Taper

The same shrink fit tool holder blank can be installed with separate extension rods of different diameters/lengths.
DIN69893 HSK Shrink Chuck Taper, Coolant

The same shrink fit tool holder blank can be installed with separate extension rods of different diameters/lengths.
DIN69871 SK Shrink Chuck Taper, Coolant

The same shrink fit tool holder blank can be installed with separate extension rods of different diameters/lengths.

<<Previous 1 2 3 4 >> Next>>